广东东晟油封生产厂家

怕漏油,装东晟油32余载油封研发定制生产厂家
135-8083-8085 135-8083-8085

TC骨架油封选型定制

产品参数

速度:≤30m/s

温度:-60+260℃

压力:≤1.5bar

规格:60x78x5

材料:NBR

硬度:N80

应用:油缸、气缸、液压、泵


全国热线

135-8083-8085

产品介绍

TC代表着骨架油封的形式,当拿到油封以后看到上面有tc字样这就代表着这是骨架油封。tc同时也代表着内骨架外包覆橡胶双唇口带弹簧骨架油封的意思。 TC骨架油封一般有nbr丁腈橡胶材质,fkm氟橡胶材质,hnbr氢化丁腈橡胶材质。其中tc油封最常用的是nbr跟fkm两种材质。

东晟密封提供密封系统解决方案及产品设计服务

产品特点

构槽简单,尺寸稳定性好

THE GROOVE IS SIMPLE AND THE DIMENSION IS STABLE

TC骨架油封具有耐磨性、抗透性、耐油性、无粘滞现象,在有润滑和无润滑时性能都很好。


《产品实拍》

TC骨架油封批发TC骨架油封定制


产品优势

  • 01减少机械故障REDUCE MECHANICAL FAILURE

    使用合适的广州东晟密封油封密封件,能让您减少工程机械设备的故障几率,能保证生产效率,让机械使用寿命更长久。

  • 02提高生产效率INCREASE PRODUCTIVITY

    油封使其提高生产效率,深受大批量客户的认可。

  • 03油封耐用周期长LONG LIFE CYCLE

    油封耐用周期长,能减少密封机械设备因为泄漏问题的拆装次数,为用户节约生产成本及损坏内部风险.

  • 04油封性能优良EXCELLENT PERFORMANCE

    专注研发油封、油封修理包及油封散件,免费为客户根据需求工况设计密封方案,将其发挥密封性能,符合工作环境的需求.

应用行业

TC骨架油封产品应用行业

TC骨架油封应用行业

TC骨架油封选型定制 - 六大行业应用解析丨广州东晟油封厂家

TC骨架油封选型定制

TC SKELETON OIL SEAL SELECTION & CUSTOMIZATION

主唇封油,副唇挡尘

MAIN LIP SEALS OIL, AUXILIARY LIP BLOCKS DUST

内包骨架,刚性与同轴度稳定

EMBEDDED SKELETON FOR STABLE RIGIDITY AND CONCENTRICITY

材质与尺寸按工况定制

MATERIAL AND DIMENSION CUSTOMIZED BY WORKING CONDITIONS

TC骨架油封属于内包骨架双唇旋转轴唇形密封圈,由金属骨架、橡胶主唇与副唇(防尘唇)三部分组成:主唇与旋转轴过盈贴合,靠唇口径向力封住润滑油;副唇位于外侧,阻挡外部粉尘与泥水进入。常用材质为NBR丁腈橡胶,亦可按介质选用FKM氟橡胶、EPDM乙丙橡胶或硅橡胶,尺寸可按d/D/H非标定制。

TC skeleton oil seal is an embedded-skeleton double-lip rotary shaft seal composed of a metal skeleton, a rubber main lip and an auxiliary dust lip. The main lip presses against the rotating shaft to retain lubricating oil, while the outer auxiliary lip blocks dust and muddy water. Standard material is NBR nitrile rubber; FKM, EPDM or silicone are available according to media, and non-standard d/D/H dimensions can be customized.

盾构机 Shield Machine

盾构机在地下数十米掘进,主驱动减速机、螺旋输送机轴承座、皮带机滚筒与刀盘主轴承长期处在膨润土泥浆、地下水与细砂的混合环境中。这里对旋转轴密封的要求与常规设备完全不同:泥浆中的石英颗粒莫氏硬度五至七级,一旦越过唇口就会像研磨膏一样在轴面犁出沟槽;同时刀盘偏载带来的轴系径向跳动与轴向窜动,会让唇口一侧持续偏磨。普通单唇油封在此工况下往往三个月内就出现渗漏,但渗漏点常被泥浆掩盖,等到发现时轴承已经进水。TC骨架油封的副唇挡尘结构正是针对这一路径:主唇朝油侧封住齿轮油,副唇朝泥浆侧先行刮除泥沙,把磨粒挡在主密封之外,等于给主唇加了一道前置过滤。内包骨架则保证大直径规格在安装后不因外圆变形而丧失同轴度——盾构设备常用 200mm 以上大轴径密封,骨架刚性不足会直接导致唇口偏磨。选型定制时还需把泥浆压力、轴系跳动量与减速机连续工作时间一并提供,据此确定唇口过盈量与材质硬度,必要时改用 FKM 以应对减速机高油温。

Shield machines excavate dozens of meters underground, where main drive reducers, screw conveyor bearing housings, belt conveyor rollers and cutterhead main bearings operate in a mixture of bentonite slurry, groundwater and fine sand. Seal requirements here differ entirely from conventional equipment: quartz particles in the slurry reach Mohs hardness 5 to 7 and, once past the lip, grind grooves into the shaft surface like an abrasive paste, while radial runout and axial float caused by unbalanced cutterhead loads keep wearing one side of the lip. Conventional single-lip oil seals often leak within three months under such conditions, and the leak is usually hidden by slurry until water has already entered the bearing. The auxiliary lip of TC skeleton oil seals targets exactly this path: the main lip retains gear oil on the oil side, while the dust lip first scrapes away mud and sand on the slurry side, blocking abrasive particles ahead of the primary seal. The embedded skeleton keeps large-diameter seals concentric after installation — shield equipment commonly uses seals above 200mm shaft diameter, and insufficient skeleton rigidity directly causes one-sided lip wear. Customization should therefore include slurry pressure, shaft runout and continuous operating hours of the reducer, so lip interference and compound hardness can be determined accordingly, with FKM specified when reducer oil temperatures run high.

施工工程 Construction Engineering

城市基建、道路铺设与水利工程现场,搅拌主机、卷扬机构、振动马达、皮带输送机与各类减速箱全天候露天作业。施工扬尘中含有水泥灰、石灰粉与沥青颗粒,这类介质遇水后呈强碱性并具有结垢性,粘附在轴面后会硬化成薄壳,随轴旋转反复刮擦唇口,使唇口在很短时间内失去弹性贴合能力。更麻烦的是,工地维护条件有限,换件窗口往往只有停机后的几个小时,密封件必须便于现场安装。TC骨架油封的副唇在这一环境中承担第一道物理屏障:结垢层被副唇先行剥离,主唇始终接触相对洁净的轴面,渗漏风险显著下降。选型时需重点关注轴面粗糙度——工地设备轴面常有锈蚀与旧密封残留,安装前必须清理到 Ra 0.2~0.8μm,否则再好的密封也会在几十小时内被磨穿。另外,搅拌轴、卷扬轴多为低速大扭矩工况,线速度不高但偏载明显,宜选用邵氏硬度 A70~A75 的 NBR 配方并适当加大唇口过盈量,同时定制加宽截面以提升抗偏磨能力。

At urban infrastructure, road paving and water conservancy sites, mixer main units, winches, vibratory motors, belt conveyors and various gearboxes operate outdoors around the clock. Construction dust contains cement ash, lime powder and asphalt particles — media that turn strongly alkaline with water and tend to scale. Once adhered to a shaft surface they harden into thin crusts that repeatedly scrape the lip as the shaft rotates, quickly stripping the lip of its elastic conformity. Maintenance conditions on site are limited, and the replacement window is often only a few hours after shutdown, so seals must be easy to install in the field. The auxiliary lip of TC skeleton oil seals acts as the first physical barrier in this environment: the scaling layer is stripped away by the dust lip first, leaving the main lip in contact with a relatively clean shaft surface and significantly lowering leakage risk. Shaft roughness deserves particular attention during selection — construction equipment shafts often carry rust and old seal residue, and the surface must be cleaned to Ra 0.2~0.8μm before installation, otherwise even a good seal will be worn through within tens of hours. Mixer and winch shafts mostly run at low speed with high torque, where linear speed is low but eccentric load is obvious; NBR compounds of Shore A 70~75 with slightly increased lip interference and a widened cross-section are therefore preferable for better resistance to one-sided wear.

污水处理 Sewage Treatment

污水处理厂的曝气机、刮泥机、搅拌器、污泥泵与鼓风机,长期在高湿度、含硫化氢与弱酸弱碱交替的环境中运转。这里的密封失效往往不是"漏油"而是"进水":一旦池内污水越过唇口进入轴承腔,润滑脂乳化、轴承锈蚀会在数周内发生。介质兼容性是选型的第一道门槛——NBR 不耐长期臭氧与高浓度氧化性消毒剂,在加氯消毒段容易出现硬化龟裂;EPDM 耐水、耐酸碱与耐臭氧性能好,但耐矿物油性差,只适合油侧无油或采用润滑脂的场合;FKM 耐化学性与耐温性均衡,适合含油、含酸碱且温度较高的减速机部位。TC骨架油封的主唇+副唇双道结构正好对应污水设备的双重需求:主唇守住油侧,副唇挡住水侧,中间腔体还可按需填充防水润滑脂形成缓冲。定制时应明确介质pH区间、是否含氯、是否含砂三项,因为含砂污水对唇口的磨蚀强度远高于普通污水,此时应提高胶料硬度并考虑加装挡圈或防护罩。

Aerators, sludge scrapers, mixers, sludge pumps and blowers in wastewater treatment plants operate continuously in high humidity with alternating weak acids, weak alkalis and hydrogen sulfide. Seal failure here usually means water ingress rather than oil leakage: once sewage crosses the lip into the bearing cavity, grease emulsification and bearing corrosion follow within weeks. Media compatibility is the first selection threshold — NBR does not withstand prolonged exposure to ozone or high-concentration oxidizing disinfectants and tends to harden and crack in chlorinated stages; EPDM offers good water, acid-alkali and ozone resistance but poor mineral oil resistance, making it suitable only where the oil side is dry or grease-lubricated; FKM balances chemical and temperature resistance and suits oil-containing, acid-alkali reducers running hot. The main-plus-auxiliary lip structure of TC skeleton oil seals matches the dual requirement of sewage equipment: the main lip guards the oil side, the dust lip blocks the water side, and the intermediate cavity can be packed with water-resistant grease as a buffer. Customization should specify media pH range, chlorine content and sand content, because sand-laden sewage abrades lips far more severely than ordinary sewage, requiring higher compound hardness and possibly a retaining ring or protective cover.

汽车发动机 Automobile Engine

汽车发动机的曲轴前后端、变速箱输入输出轴、轮毂与水泵轴,是旋转轴密封最典型的应用位置。这类工况的突出特点是转速高、油温高、寿命要求长:曲轴箱内机油温度长期在 90~120℃,发动机舱环境温度在冬季冷启动时可低至 -30℃,密封件必须同时承受冷热交变;轴颈线速度随发动机转速升高,高速工况下唇口摩擦热积聚,普通 NBR 在持续高温下会硬化失弹。因此汽车发动机部位多采用FKM 氟橡胶,部分曲轴油封进一步改用 PTFE 唇片以降低摩擦扭矩。TC骨架油封在此的价值在于副唇防尘:发动机舱粉尘、泥水与洗车高压水都会从外侧侵袭,副唇把污染物挡在主唇之外,避免磨粒进入后在轴颈上形成沟槽——轴颈一旦起沟,单换密封件无法修复,只能上轴或换件。定制要点是按线速度选材、按油温定胶种,同时严格控制唇口同心度与轴颈粗糙度 Ra 0.2~0.4μm,因为高速下微小的偏心会被放大成周期性偏磨。

Crankshaft front and rear ends, transmission input and output shafts, wheel hubs and water pump shafts are the classic locations for rotary shaft seals in automobiles. These applications are characterized by high speed, high oil temperature and long service life: crankcase oil stays at 90~120°C for extended periods, engine bay temperatures can drop to -30°C during cold winter starts, and seals must endure repeated thermal cycling; shaft surface speed rises with engine rpm, friction heat accumulates at the lip at high speed, and ordinary NBR hardens and loses elasticity under sustained heat. FKM fluoroelastomer is therefore widely used in engine positions, and some crankshaft seals have moved further to PTFE lip elements to reduce friction torque. The value of TC skeleton oil seals here lies in the auxiliary dust lip: engine bay dust, muddy water and high-pressure car-washing spray all attack from the outside, and the dust lip keeps contaminants away from the main lip so that abrasives cannot enter and groove the journal — once a journal is grooved, replacing the seal alone cannot restore it. Customization should match material to linear speed and compound to oil temperature, while strictly controlling lip concentricity and journal roughness at Ra 0.2~0.4μm, since small eccentricities are amplified into periodic one-sided wear at high speed.

机器人行业 Robot Industry

工业机器人关节、谐波减速机、RV减速机与伺服电机输出轴,对密封件的要求与传统重载设备方向相反:转速不高,但对启停扭矩、回差与洁净度极为敏感。机器人关节每完成一次动作都要经历启动、停顿和反向,唇口在低速往复与频繁停转状态下容易产生粘滑爬行,表现为定位抖动和重复精度下降。因此这一位置的选型重点不在"耐压"而在低摩擦与稳定的摩擦特性:胶料硬度过高会增大启动扭矩,过低则唇口跟随性差,通常取邵氏 A68~A72 并配合低摩擦配方;对精度要求更高的谐波减速机,会改用 PTFE 唇片或低扭矩结构。TC骨架油封的副唇在此还承担洁净室与切削粉尘的隔离作用,防止粉尘沿轴进入减速机润滑腔。内包骨架则保证安装后唇口与轴线的同轴度,避免微小偏心演变成关节侧的周期性渗油。定制时需提供关节额定扭矩、允许启动扭矩、工作环境洁净等级与预期寿命,并按小轴径(常见 10~40mm)控制唇口过盈量,避免过盈过大带来爬行。

Industrial robot joints, harmonic reducers, RV reducers and servo motor output shafts demand the opposite of heavy-duty equipment: rotation speed is low, but starting torque, backlash and cleanliness are extremely sensitive. Every robot motion involves acceleration, dwell and reversal, so lips operating at low speed with frequent stops are prone to stick-slip, which shows up as positioning jitter and reduced repeatability. Selection here therefore focuses on low and stable friction rather than pressure resistance: excessively hard compounds raise starting torque, excessively soft ones reduce lip tracking, so Shore A 68~72 with low-friction formulations is typical; harmonic reducers requiring higher precision may use PTFE lip elements or low-torque designs. The auxiliary lip of TC skeleton oil seals also isolates cleanroom and cutting dust, preventing particles from entering the reducer lubrication cavity along the shaft. The embedded skeleton maintains lip-to-axis concentricity after installation, avoiding periodic oil seepage at the joint caused by slight eccentricity. Customization should include rated joint torque, allowable starting torque, cleanliness class and expected life, with lip interference controlled for small shaft diameters commonly between 10 and 40mm to prevent stick-slip.

智能制造行业 Intelligent Manufacturing Industry

数控机床主轴、滚珠丝杠、伺服电机、自动化输送线与加工中心转台,是智能制造产线里密封件最集中的部位。这里的工况组合最复杂:主轴转速高、切削液持续喷淋、铁屑与磨屑伴随机油循环。切削液中含极压添加剂、防锈剂与表面活性剂,对 NBR 有一定溶胀作用,长期浸泡后胶料会软化、唇口尺寸变化,密封随之失效;主轴高速运转带来的唇口摩擦热又要求材料耐温,因此高速主轴多选用 FKM 或 PTFE 结构。另一方面,加工现场的铁屑与砂轮磨屑是唇口的隐形杀手,细小的硬质颗粒随切削液冲刷到唇口,几周内就能磨出渗漏通道。TC骨架油封的副唇在此形成前置挡屑层,主唇专注封油,两者分工明确;配合防护罩或迷宫结构可进一步延长寿命。定制时建议明确主轴最高转速、切削液类型与浓度、是否含极压添加剂,并校核线速度是否超出材料允许范围——线速度越高,唇口温升越快,材料选择必须优先于尺寸选择。

CNC machine tool spindles, ball screws, servo motors, automated conveyor lines and machining center rotary tables are where seals concentrate in intelligent manufacturing lines. The combination of conditions here is the most complex: high spindle speeds, continuous coolant spraying, and chips and grinding debris circulating with oil. Coolants contain extreme-pressure additives, rust inhibitors and surfactants that swell NBR to some degree; prolonged immersion softens the compound and changes lip dimensions until sealing fails. Friction heat at high spindle speed also demands temperature resistance, so high-speed spindles commonly use FKM or PTFE structures. Meanwhile, chips and grinding debris from the workshop are hidden killers of lips — fine hard particles carried by coolant can wear a leakage path within a few weeks. The auxiliary lip of TC skeleton oil seals forms a front debris barrier while the main lip concentrates on oil retention, and a protective cover or labyrinth structure can further extend service life. Customization should specify maximum spindle speed, coolant type and concentration, and whether extreme-pressure additives are present, and should verify that linear speed stays within the material limit — the higher the speed, the faster the lip temperature rises, so material selection must precede dimension selection.

线速度≤12m/s,压力≤0.05MPa,温度-40~+200℃(按材质)

SPEED ≤12M/S, PRESSURE ≤0.05MPA, TEMPERATURE -40~+200℃ (BY MATERIAL)

NBR丁腈橡胶:-40~+100℃(短时 120℃),常规线速度 ≤8m/s
FKM氟橡胶:-20~+200℃,耐矿物油与化学介质,线速度可更高
轴面粗糙度 Ra 0.2~0.8μm,高速工况建议 Ra 0.2~0.4μm;轴端倒角 15°~30°
轴径公差 h11,座孔公差 H8;沟槽按 GB/T 13871.1 / ISO 6194 执行
超出压力范围须加装挡圈,不得将骨架油封作为承压密封件使用

TC骨架油封适用行业:盾构机 Shield Machine、施工工程 Construction Engineering、污水处理 Sewage Treatment、汽车发动机 Automobile Engine、机器人行业 Robot Industry、智能制造行业 Intelligent Manufacturing Industry

Application Scenarios for TC Skeleton Oil Seals: Shield Machine, Construction Engineering, Sewage Treatment, Automobile Engine, Robot Industry, Intelligent Manufacturing Industry

广州东晟油封厂家

GUANGZHOU DONGSHENG OIL SEAL MANUFACTURER

dshseals.cn

集研发、生产、销售于一体的国家高新技术油封厂家 · 235种材料配方 · 1725种选型方案

National High-Tech Enterprise integrating R&D, Production and Sales · 235 Material Formulations · 1725 Selection Solutions


使用说明

TC骨架油封选型定制 使用说明 - 广州东晟油封厂家

TC骨架油封 使用说明

TC SKELETON OIL SEAL · INSTALLATION & MAINTENANCE GUIDE

结构与材质 Structure & Material

TC骨架油封是内包骨架双唇旋转轴唇形密封圈,由金属骨架、橡胶主唇、橡胶副唇三部分组成。主唇朝向油侧(介质侧),与旋转轴过盈贴合,靠唇口的径向力把润滑油挡在腔体内;副唇朝向大气侧,用于阻挡外部粉尘、泥水与清洗液,减少磨粒进入主唇工作区。骨架镶嵌在橡胶体内,提供径向刚性与安装定位,使唇口在座孔中保持稳定的同轴状态。常用材质为NBR丁腈橡胶(邵氏硬度 A70±5),可选 FKM氟橡胶、EPDM乙丙橡胶、硅橡胶;部分规格在主唇外侧配置螺旋弹簧,用于补偿唇口磨损后的径向力衰减。

TC skeleton oil seal is an embedded-skeleton double-lip rotary shaft seal made of a metal skeleton, a rubber main lip and a rubber auxiliary lip. The main lip faces the oil side and presses against the rotating shaft, retaining lubricating oil by radial lip force; the auxiliary lip faces the atmosphere side and blocks external dust, muddy water and cleaning fluids, reducing abrasive ingress into the main lip working zone. The skeleton embedded in the rubber body provides radial rigidity and installation positioning, keeping the lip concentric within the housing bore. Standard material is NBR nitrile rubber (Shore A 70±5); FKM, EPDM and silicone are optional. Some sizes are fitted with a helical spring behind the main lip to compensate for radial force loss after lip wear.

安装要点 Installation Key Points

① 安装方向:主唇必须朝向油侧(介质侧),副唇朝向外部大气侧。装反后主唇失去油压自紧作用,会出现持续渗漏,同时副唇无法挡尘。
② 座孔与沟槽:座孔直径公差取H8,安装孔口倒角15°~30°,孔口不得有毛刺与磕碰;沟槽尺寸与深度按GB/T 13871.1或ISO 6194执行。
③ 轴的要求:轴径公差取h11,轴面粗糙度Ra 0.2~0.8μm(高速工况收紧到 Ra 0.2~0.4μm),表面硬度建议≥HRC45;不得存在螺旋加工纹、锈蚀、毛刺与磕伤,轴端倒角15°~30°。
④ 安装工具:使用专用套筒或导向锥压装,施力点落在骨架外圆而非唇口;严禁锤击、螺丝刀撬动、加热后强装,唇口一旦变形或划伤即不可修复。
⑤ 润滑:装配前在唇口内侧与轴面涂抹少量清洁机油或锂基脂,干装会在启动瞬间产生干摩擦,导致唇口烧蚀。
⑥ 同轴与跳动:安装后轴在密封位置的径向跳动建议 ≤0.1mm,壳体孔与轴的同轴度 ≤0.15mm;高速或大轴径工况需进一步收紧,否则唇口将出现单侧偏磨。

① Installation Direction: The main lip must face the oil side (media side) and the auxiliary lip the atmosphere side. Reversed installation removes the pressure-assisted sealing effect and causes continuous leakage, while the dust lip can no longer block contaminants.
② Housing and Groove: Housing bore tolerance H8, bore chamfer 15°~30°, no burrs or dents at the bore edge. Groove dimensions and depth per GB/T 13871.1 or ISO 6194.
③ Shaft Requirements: Shaft tolerance h11, surface roughness Ra 0.2~0.8μm (tightened to Ra 0.2~0.4μm at high speed), surface hardness ≥HRC45. No spiral machining marks, rust, burrs or scratches; shaft end chamfer 15°~30°.
④ Installation Tooling: Press in with a dedicated sleeve or assembly cone, applying force on the skeleton outer diameter rather than the lip. Never use hammers, screwdrivers or forced installation after heating — a deformed or scratched lip is irreparable.
⑤ Lubrication: Apply a thin film of clean oil or lithium grease to the inner lip and shaft before assembly. Dry installation causes dry friction at start-up and lip burning.
⑥ Concentricity and Runout: After installation, shaft radial runout at the seal position should be ≤0.1mm and housing-to-shaft concentricity ≤0.15mm. High-speed or large-diameter applications require tighter values, otherwise one-sided lip wear will occur.

工况参数 Operating Parameters

线速度:NBR ≤8 m/s,FKM ≤12 m/s(线速度越高,唇口温升越快,需相应提高轴面光洁度)
压力:≤0.05 MPa(骨架油封属低压密封,超出时必须加装挡圈或改用耐压结构,不可作为承压密封件使用)
温度范围:NBR -40℃ ~ +100℃(短时 120℃);FKM -20℃ ~ +200℃
适配介质:矿物基液压油、齿轮油、锭子油、锂基脂、水乙二醇(视胶种)
不推荐介质:NBR 不耐磷酸酯系液压油与强极性合成油;FKM 不耐酮类、酯类、氨与低分子酯
尺寸定制:常规轴径段按标准系列选用,非标 d/D/H 可按图纸定制,需提供轴径、座孔直径、安装宽度与工况四项
选型提示:同一轴径存在多种截面高度与宽度,选型以轴径 d、座孔 D、安装宽度 H 三要素为准,可对照TC骨架油封选型定制页面确认标准系列规格

Linear Speed: NBR ≤8 m/s, FKM ≤12 m/s (higher speed raises lip temperature and requires finer shaft finish)
Pressure: ≤0.05 MPa (skeleton oil seals are low-pressure seals; above this value a retaining ring or a pressure-resistant design is required — they must not be used as pressure-bearing seals)
Temperature: NBR -40℃ ~ +100℃ (short-term 120℃); FKM -20℃ ~ +200℃
Compatible Media: Mineral hydraulic oils, gear oils, spindle oils, lithium grease, water-glycol (depending on compound)
Not Recommended: NBR is unsuitable for phosphate ester fluids and strongly polar synthetic oils; FKM is unsuitable for ketones, esters, ammonia and low-molecular esters
Customization: Standard shaft diameter ranges are available from the catalogue; non-standard d/D/H can be manufactured to drawings, requiring shaft diameter, housing bore, installation width and operating conditions.
Selection Tip: One shaft diameter may correspond to several section heights and widths; selection is based on the three elements shaft diameter d, housing bore D and installation width H. Refer to the TC skeleton oil seal selection page to confirm standard series sizes.

维护周期 & 失效排查 Maintenance Schedule & Failure Diagnosis

维护周期:
· 正常工况(清洁环境、油温稳定):12个月或累计运行约 4000~6000 小时检查一次
· 严苛工况(粉尘、高温、含砂介质):6个月检查一次
· 检查内容:唇口有无裂纹、沟槽、硬化;副唇是否被磨穿;轴面是否起沟或锈蚀;油脂是否乳化变质

常见失效与排查:
· 主唇装反 → 持续渗油、油位下降快,按主唇朝油侧重装
· 唇口被切伤 → 压装时唇口越过了孔口毛刺或键槽,更换密封件,压装时确保唇口不接触轴端
· 单侧偏磨 → 同轴度或径向跳动超差,检查轴承与座孔,必要时修正轴系
· 唇口硬化龟裂 → 油温长期超过材料上限,改用 FKM 或降低油温
· 胶料溶胀变软 → 介质与胶种不匹配,更换胶种(如 NBR 改 FKM/EPDM)
· 轴面起沟渗漏 → 磨粒进入或长期干运转,更换密封件并修复轴面,同时加装副唇防护

Maintenance Schedule:
· Normal Conditions (clean environment, stable oil temperature): inspect every 12 months or about 4000~6000 operating hours
· Severe Conditions (dust, high temperature, sand-laden media): inspect every 6 months
· Inspection Items: Lip cracks, grooves and hardening; auxiliary lip breakthrough; shaft grooving or rust; grease emulsification

Common Failures & Diagnosis:
· Main Lip Reversed → Continuous oil seepage and rapid oil level drop. Reinstall with the main lip facing the oil side.
· Cut Lip → Lip crossed a bore burr or keyway during pressing. Replace the seal and keep the lip clear of the shaft end during assembly.
· One-Sided Wear → Concentricity or radial runout out of tolerance. Check bearings and housing bore, correct the shaft system if necessary.
· Hardened and Cracked Lip → Oil temperature persists above the material limit. Switch to FKM or reduce oil temperature.
· Swollen and Softened Compound → Media incompatible with the compound. Change compound (e.g. NBR to FKM/EPDM).
· Shaft Grooving and Leakage → Abrasive ingress or prolonged dry running. Replace the seal, restore the shaft surface and add auxiliary lip protection.

TC骨架油封适用行业:盾构机 Shield Machine、施工工程 Construction Engineering、污水处理 Sewage Treatment、汽车发动机 Automobile Engine、机器人行业 Robot Industry、智能制造行业 Intelligent Manufacturing Industry

广州东晟油封厂家

GUANGZHOU DONGSHENG OIL SEAL MANUFACTURER

dshseals.cn

集研发、生产、销售于一体的国家高新技术油封厂家 · 235种材料配方 · 1725种选型方案

National High-Tech Enterprise integrating R&D, Production and Sales · 235 Material Formulations · 1725 Selection Solutions


联系我们

尊敬的访客

东晟密封主要从事各种行业油封、油封修理包、工程机械油封散件的研究、制造和销售。产品广泛用于:工程机械、航天、石油、化工、冶金、电力、汽车、造船、煤矿、电子、家电、卫浴、泵阀、造纸、液压、气动、机器人、无人机、盾构机、智能制造等行业。

全国咨询热线:400-0087-996

  • 联系手机联系手机13580830786
  • 联系邮箱联系邮箱3030651527@qq.com
  • 公司地址公司地址广东省东莞市石碣镇横滘工业区伟业街4号

寻找适合您应用的油封?东晟为您设计严苛条件下运行的油封,免费提供全方位油封系统解决方案!

产品定制咨询

热品推荐 / Hot product

TC骨架油封选型定制

TC代表着骨架油封的形式,当拿到油封以后看到上面有tc字样这就代表着这是骨架油封...

产品中心

咨询热线

135-8083-8085